Thread: Ravenloft (Origional Adventure)
Thursday, 8th January, 2004, 03:37 PM #1
Ravenloft (Origional Adventure)
Anyone converting this nice piece of nolstalgia?
I'm looking for a pure 3.5 conversion. I don't want info from the Ravenloft campaign setting used. Has anyone done a straight 3.0 or 3.5 conversion?
- EN World
- has no influence
- on advertisings
- that are displayed by
- Google Adsense
Novice (Lvl 1)
- Join Date
- Jan 2002
- Braintree, MA
ř Ignore Davelozzi
The recent issue of Dragon (# 315) has conversions of Strahd himself, but not the whole module.
Check your email
"The Soul of D&D? It's rolling a natural 20 when you're down to 3 hit points and the cleric's on the floor and you're staring that sunnavabitch bugbear right in his bloodshot eye and holding the line just long enough to let the wizard unleash a fireball at the guards who are on their way, because they're all that stands between you, the Foozle and Glory." - WizarDru
Resent (the first one went to a comcast address -- the one EN World shows).
Originally Posted by Olgar Shiverstone
LOL! I forgot I used my Comcast email for this forum =P
I would LOVE to see your write up of Strahd.
I have one but you seem to graps the sublties of the D20 system better than I do (And yer more creative me thinks)
Send it to my comcast email address (that's the 1st one you sent it to).
I was at work when I requested it be sent to the netscape address (so I could check it out right away =D)
How big a file can you take? I did Strahd in Heroforge 3.5, which is about 1.5 MB zipped (5.4 MB unzipped)
My comcast email can handle up to a 5 meg email so send it on over!Originally Posted by Olgar Shiverstone
Question though: What is heroforge 3.5?
Can I view him without it & where can I get it to start playing around with it
Sent. You just need MS Excel to view it. (Oh, I forgot -- make sure you select "enable macros" when the Excel file opens.)
BlackBart's Heroforge 3.5 is a free MS Excel spreadsheet that is used for character generation. It can handle a wide variety of tasks, and includes a lot of data. There are still a few bugs in it (mostly in the templates section at this point), but the programmer is great at refining and updating -- I seldom run into a meaningful error at this point. I use it for all my PCs and complex NPCs (those with high levels, multiple classes, or prestige classes -- I use etools for run-of-the-mill monsters and single-classed NPCs).
Try it out; it's got a great quality-to-dollar ratio Prints out a great character sheet, too.
Heck, just save a backup copy of the Strahd file and you can reset the spreadsheet to use for your own characters (or tweak up Strahd to your liking).
I originally had Strahd as a Pale Master (Dragon 315 just made him a Nec 10, which is a straight translation of the original module, but is a little dull), but decided Eldritch Knight was more to my liking, due to his background as a conquerer (per the Book of Strahd in the module).
Last edited by Olgar Shiverstone; Monday, 12th January, 2004 at 11:03 PM.
By mshea in forum RPGs & Tabletop Gaming DiscussionReplies: 4Last Post: Sunday, 9th November, 2008, 08:48 PM
By mshea in forum RPGs & Tabletop Gaming DiscussionReplies: 4Last Post: Sunday, 2nd November, 2008, 02:56 PM
By Ardenian in forum RPGs & Tabletop Gaming DiscussionReplies: 4Last Post: Wednesday, 28th March, 2007, 10:20 PM
By Crothian in forum RPGs & Tabletop Gaming DiscussionReplies: 11Last Post: Saturday, 23rd July, 2005, 02:01 PM
By Gotten Grabmal in forum RPGs & Tabletop Gaming DiscussionReplies: 1Last Post: Sunday, 31st October, 2004, 04:40 PM