Menu
News
All News
Dungeons & Dragons
Level Up: Advanced 5th Edition
Pathfinder
Starfinder
Warhammer
2d20 System
Year Zero Engine
Industry News
Reviews
Dragon Reflections
Columns
Weekly Digests
Weekly News Digest
Freebies, Sales & Bundles
RPG Print News
RPG Crowdfunding News
Game Content
ENterplanetary DimENsions
Mythological Figures
Opinion
Worlds of Design
Peregrine's Next
RPG Evolution
Other Columns
From the Freelancing Frontline
Monster ENcyclopedia
WotC/TSR Alumni Look Back
4 Hours w/RSD (Ryan Dancey)
The Road to 3E (Jonathan Tweet)
Greenwood's Realms (Ed Greenwood)
Drawmij's TSR (Jim Ward)
Community
Forums & Topics
Forum List
Latest Posts
Forum list
*Dungeons & Dragons
Level Up: Advanced 5th Edition
D&D Older Editions
*TTRPGs General
*Pathfinder & Starfinder
EN Publishing
*Geek Talk & Media
Search forums
Chat/Discord
Resources
Wiki
Pages
Latest activity
Media
New media
New comments
Search media
Downloads
Latest reviews
Search resources
EN Publishing
Store
EN5ider
Adventures in ZEITGEIST
Awfully Cheerful Engine
What's OLD is NEW
Judge Dredd & The Worlds Of 2000AD
War of the Burning Sky
Level Up: Advanced 5E
Events & Releases
Upcoming Events
Private Events
Featured Events
Socials!
Twitch
YouTube
Facebook (EN Publishing)
Facebook (EN World)
Twitter
Instagram
TikTok
Podcast
Features
Top 5 RPGs Compiled Charts 2004-Present
Adventure Game Industry Market Research Summary (RPGs) V1.0
Ryan Dancey: Acquiring TSR
Q&A With Gary Gygax
D&D Rules FAQs
TSR, WotC, & Paizo: A Comparative History
D&D Pronunciation Guide
Million Dollar TTRPG Kickstarters
Tabletop RPG Podcast Hall of Fame
Eric Noah's Unofficial D&D 3rd Edition News
D&D in the Mainstream
D&D & RPG History
About Morrus
Log in
Register
What's new
Search
Search
Search titles only
By:
Forums & Topics
Forum List
Latest Posts
Forum list
*Dungeons & Dragons
Level Up: Advanced 5th Edition
D&D Older Editions
*TTRPGs General
*Pathfinder & Starfinder
EN Publishing
*Geek Talk & Media
Search forums
Chat/Discord
Menu
Log in
Register
Install the app
Install
Community
General Tabletop Discussion
*Geek Talk & Media
Painting Miniatures Guide
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="DethStryke" data-source="post: 3271645" data-attributes="member: 1309"><p>Ditto on the sentiments that this is awesome and should be pinned. <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile :)" loading="lazy" data-shortname=":)" /></p><p></p><p>I've been doing a lot of research, trying to improve my miniature painting station and how I go about the hobby... two of the best improvements I've found/come up with are helping to light the miniature better when photographing them and how to mount them easily with a handle for priming/spraying/painting/etc. Sorry, I'm not a cool kid with ultra hip Hide/Show skillz. What's the tag for that?</p><p></p><p><strong>Better lighting through Chemistry</strong>:</p><p><a href="http://www.instructables.com/id/E6VQS8JNGQEWPKH4JG/" target="_blank">http://www.instructables.com/id/E6VQS8JNGQEWPKH4JG/</a></p><p></p><p>Using this method, I can use a 100 watt light from my painting station to illuminate the whole miniature - it doesn't even have to be a constant fixture and takes less room than every other setup I've used.</p><p></p><p>-------------</p><p><strong>Getting a Grip</strong>:</p><p></p><p>The nexus of this idea was a combination of my existing handles (shaker pegs with blue tack holding the miniature on the top) and Jakob Nielson's transporting mini tip from here:</p><p></p><p><a href="http://www.jrn-works.dk/tutorials/tut.php?tut=transportingMinis&lan=eng" target="_blank">http://www.jrn-works.dk/tutorials/tut.php?tut=transportingMinis&lan=eng</a></p><p></p><p>I had not been super happy with the blue tack... it seemed that I was going through too much of it and it would not hold as well any more (maybe they changed the formula?). I saw the little bolt & nut combo and looked at my pegs and said to myself, "self, you have got to marry those ideas!" I really liked the secure nature of the hardware, but I find the shaker pegs to be hand friendly (I have large hands - enough to palm a basketball - so holding a small little block of wood or some nonsense is cramp city).</p><p></p><p>Here is my process:</p><p></p><p>This one is definitely not as easy to do without some specific tools. I will edit this if I find a better way of doing it - I'm still experimenting with the best way to produce the end result. The tools I used were as follows:</p><p>* Dremel Rotary Tool</p><p>* Miniature drill bits (specifically a 3/32 bit - can be found in some deluxe regular drill bit kits)</p><p>* Cut-off wheel (one made to cut metal) for the Dremel</p><p>* #4-40 x 3/4" Machine Bolts w/ nuts</p><p>* a screwdriver for the bolts (probably flat head... the wrench item that the Dremel comes with works well!)</p><p>* Shaker Pegs</p><p>* Zap-A-Gap.</p><p>Warning: Never use the the Dremel without hand and eye protection! Bits of whatever into your eye-ball does not equate to a good time. You should also use a vice to hold the pegs while you drill and cut things off... I don't, but I'm dumb like that.</p><p></p><p>1. Take a <a href="http://www.woodcraft.com/family.aspx?FamilyID=1119" target="_blank">shaker peg</a> and use the drill bit with the Dremel to drill a hole roughly 1/4"-3/16" deep in the center of the rounded end. </p><p> - <em>Tip: Use masking tape on the drill bit to mark the depth if you like, so you can see how far you're going on the fly.</em></p><p> - <em>Tip: You want this hole to be as straight as you can possibly make it, otherwise you're going to have figs that lean over the edge or won't fit on the peg nicely. If you're lucky enough to have a drill press (real or for the Dremel), this will make it a lot easier</em></p><p></p><p>2. Dab a bit of Zap-A-Gap on the last 1/4" of the #4-40 bolt. Screw this glued wonder into the hole you just made. You should need a screwdriver to get it to bite into the wood - if it simply drops in then you made too wide of a hole.</p><p> - <em>Tip: Do not use pliers or something akin to hold the bolt while you do this! You do not want to chance doing damage the threads that will be above the wood or the whole point of this is shot and pointless.</em></p><p></p><p>2.5. Let that dry for a bit. Should be ready in an hour, so go do something else for a spell...</p><p></p><p>3. Welcome back! Now we cut the head off the bolt using the cut-off wheel on the Dremel. This is going to leave us with the nib for screwing in the bolts that we will glue to the bottom of the figs base. I prefer to make it the width of the bolt, so that the fig sits snugly perched on the apex of the rounded top. You can feel free to make it however long you wish. Error on the side of caution and start longer than you need. That way if you mess it up, you can always just cut off a little bit more.</p><p> - <em>Tip: When you shear the head off, try to do it in one smooth controlled cut. If you stop and start, you will most likely have a funky ridge that will not allow you to screw the bolt on (threads get weird).</em></p><p></p><p>4. Glue the #4-40 bolt to the underside of the miniature's base that you want to hold. I use the #4-40 size hardware because I also use GW bases, and these hide flush with the base when it's in use. Bigger / deeper bases can, of course, accommodate larger nuts.</p><p> - <em>Tip: As Jakob notes, you can use a bit of Green Stuff to hold the bolt on there better. Score the spot you're gluing to with a razer to rough it up and give something for the glue/putty to bond to. Be careful not to let whatever substance you use clog the bolt hole though. This is all sounding vaguely dirty...</em></p><p> - <em>Tip: #4-40 machine bolts and nuts are sometimes considered specialty hardware depending on the store you go to. Lowes Home Improvement and Home Depot sell them in my area</em></p><p></p><p>So far, they are working as well as I had hoped for me. For my work table, I took some scrap 1x4" in a 12" section and drilled 1/2 holes through the wood with some decent spacing. The pegs fit in 1/2" holes already! Yay! That way they stand up by themselves but have enough room where they aren't bumping each other. Those planks I use on the table top or to move minis around (outside to spray them, inside to dry them in the exhaust fan equipped bathroom, etc.) </p><p></p><p>I also have a peg board hung on the wall directly above my desk. Crawford Manufacturing makes all kinds of peg board holders and hooks - their <a href="http://www.acehardware.com/sm-crawford-multi-tool-rack-18888--pi-1292027.html" target="_blank">Multi-Use Tool Holder</a> is great for holding the shaker pegs. It cradles them right under the rounded head, and keeps them up on the wall. I use them for lining up squads that are in progress so they don't dominate my table-top for other things being modded or generally put together.</p></blockquote><p></p>
[QUOTE="DethStryke, post: 3271645, member: 1309"] Ditto on the sentiments that this is awesome and should be pinned. :) I've been doing a lot of research, trying to improve my miniature painting station and how I go about the hobby... two of the best improvements I've found/come up with are helping to light the miniature better when photographing them and how to mount them easily with a handle for priming/spraying/painting/etc. Sorry, I'm not a cool kid with ultra hip Hide/Show skillz. What's the tag for that? [B]Better lighting through Chemistry[/B]: [url]http://www.instructables.com/id/E6VQS8JNGQEWPKH4JG/[/url] Using this method, I can use a 100 watt light from my painting station to illuminate the whole miniature - it doesn't even have to be a constant fixture and takes less room than every other setup I've used. ------------- [B]Getting a Grip[/B]: The nexus of this idea was a combination of my existing handles (shaker pegs with blue tack holding the miniature on the top) and Jakob Nielson's transporting mini tip from here: [url]http://www.jrn-works.dk/tutorials/tut.php?tut=transportingMinis&lan=eng[/url] I had not been super happy with the blue tack... it seemed that I was going through too much of it and it would not hold as well any more (maybe they changed the formula?). I saw the little bolt & nut combo and looked at my pegs and said to myself, "self, you have got to marry those ideas!" I really liked the secure nature of the hardware, but I find the shaker pegs to be hand friendly (I have large hands - enough to palm a basketball - so holding a small little block of wood or some nonsense is cramp city). Here is my process: This one is definitely not as easy to do without some specific tools. I will edit this if I find a better way of doing it - I'm still experimenting with the best way to produce the end result. The tools I used were as follows: * Dremel Rotary Tool * Miniature drill bits (specifically a 3/32 bit - can be found in some deluxe regular drill bit kits) * Cut-off wheel (one made to cut metal) for the Dremel * #4-40 x 3/4" Machine Bolts w/ nuts * a screwdriver for the bolts (probably flat head... the wrench item that the Dremel comes with works well!) * Shaker Pegs * Zap-A-Gap. Warning: Never use the the Dremel without hand and eye protection! Bits of whatever into your eye-ball does not equate to a good time. You should also use a vice to hold the pegs while you drill and cut things off... I don't, but I'm dumb like that. 1. Take a [URL=http://www.woodcraft.com/family.aspx?FamilyID=1119]shaker peg[/URL] and use the drill bit with the Dremel to drill a hole roughly 1/4"-3/16" deep in the center of the rounded end. - [I]Tip: Use masking tape on the drill bit to mark the depth if you like, so you can see how far you're going on the fly.[/I] - [I]Tip: You want this hole to be as straight as you can possibly make it, otherwise you're going to have figs that lean over the edge or won't fit on the peg nicely. If you're lucky enough to have a drill press (real or for the Dremel), this will make it a lot easier[/I] 2. Dab a bit of Zap-A-Gap on the last 1/4" of the #4-40 bolt. Screw this glued wonder into the hole you just made. You should need a screwdriver to get it to bite into the wood - if it simply drops in then you made too wide of a hole. - [I]Tip: Do not use pliers or something akin to hold the bolt while you do this! You do not want to chance doing damage the threads that will be above the wood or the whole point of this is shot and pointless.[/I] 2.5. Let that dry for a bit. Should be ready in an hour, so go do something else for a spell... 3. Welcome back! Now we cut the head off the bolt using the cut-off wheel on the Dremel. This is going to leave us with the nib for screwing in the bolts that we will glue to the bottom of the figs base. I prefer to make it the width of the bolt, so that the fig sits snugly perched on the apex of the rounded top. You can feel free to make it however long you wish. Error on the side of caution and start longer than you need. That way if you mess it up, you can always just cut off a little bit more. - [I]Tip: When you shear the head off, try to do it in one smooth controlled cut. If you stop and start, you will most likely have a funky ridge that will not allow you to screw the bolt on (threads get weird).[/I] 4. Glue the #4-40 bolt to the underside of the miniature's base that you want to hold. I use the #4-40 size hardware because I also use GW bases, and these hide flush with the base when it's in use. Bigger / deeper bases can, of course, accommodate larger nuts. - [I]Tip: As Jakob notes, you can use a bit of Green Stuff to hold the bolt on there better. Score the spot you're gluing to with a razer to rough it up and give something for the glue/putty to bond to. Be careful not to let whatever substance you use clog the bolt hole though. This is all sounding vaguely dirty...[/I] - [I]Tip: #4-40 machine bolts and nuts are sometimes considered specialty hardware depending on the store you go to. Lowes Home Improvement and Home Depot sell them in my area[/I] So far, they are working as well as I had hoped for me. For my work table, I took some scrap 1x4" in a 12" section and drilled 1/2 holes through the wood with some decent spacing. The pegs fit in 1/2" holes already! Yay! That way they stand up by themselves but have enough room where they aren't bumping each other. Those planks I use on the table top or to move minis around (outside to spray them, inside to dry them in the exhaust fan equipped bathroom, etc.) I also have a peg board hung on the wall directly above my desk. Crawford Manufacturing makes all kinds of peg board holders and hooks - their [URL=http://www.acehardware.com/sm-crawford-multi-tool-rack-18888--pi-1292027.html]Multi-Use Tool Holder[/URL] is great for holding the shaker pegs. It cradles them right under the rounded head, and keeps them up on the wall. I use them for lining up squads that are in progress so they don't dominate my table-top for other things being modded or generally put together. [/QUOTE]
Insert quotes…
Verification
Post reply
Community
General Tabletop Discussion
*Geek Talk & Media
Painting Miniatures Guide
Top