Reply to thread

Message: <blockquote data-quote="DSumner" data-source="post: 7808341" data-attributes="member: 92589">3D Print It: Rustic Tavern FurnitureOur latest 3D print file. This one has more of a fantasy bent to it. <img src="https://www.drivethrurpg.com/images/3983/288703.jpg" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" />RUSTIC TAVERN FURNITURE:“Hello friends! Make your selves at home… I’ll have a wench over with some starter ale and hot rolls in just a moment...”The bartender calls out to the party and seems friendly enough. The place appears to be well stocked and laid out with wooden furniture that is quite durable but rustic in nature. The thief eyes the bench for possible splinters before sitting down…Need some simple, rustic looking furniture for your fantasy tavern, inn, guildhall, or moathouse? This collection features simple to print chairs, benches, and tables with a bit of a rough wood grain look. Made to print easily and paint simply, these furniture bits are perfect for someone that wants to be able to detail up that tavern encounter location quickly and easily.The default size settings are perfect for miniatures on the 28mm to 30mm scale. Naturally this item can be resized in your slicer program to meet your needs if your miniatures are on a different scale.There’s several files in this collection. The default sizes for each of these are provided below. Note that the chairs are printed on their sides and the representation of size is for a chair that would be standing up once printed. The benches and tables are printed upside down to ease with the printing process.Also note that the chairs sit a little lower than the benches. If you want them equal height than either reduce the bench height or increase the chair height (Z) when running the files through your slicing program.Chair A: 12x10x19mmChair B: 12x10x19mmBench A: 32x12x13mmBench A: 55x12x12mmBench C: 40x12x13mmTable A: 30x30x20mmTable B: 79x32x10mmTable C: 42x26x19mmTable D: 60x28x19mmDon’t see the size you need? Simply adjust one of the furniture bits above as needed to get the size you are looking for.Here's the recommended Cura settings that have worked for the designer's test print using the following: Ender 3 (printer), Hatchbox 1.75 PLA. Please note that these settings print very slow, but should provide you a nice finish with details. You can always speed the settings up if you prefer speed over fine detail.Layer Height: 0.06mmWall Thickness: .8mmTop Thickness: .6mm (10 layers)Bottom Thickness: .6mm (10 layers)Horizontal Expansion: 0mmInfill Density: 15mm (Grid Pattern)Printing Temperature: 200 C (for PLA)Build Plate Temperature: 60 CEnable Retraction: YesPrint Speed: 40mm[URL unfurl="true"]https://www.drivethrurpg.com/product/288703/3D-Print-It-Rustic-Tavern-Furniture[/URL]</blockquote>

Verification