Reply to thread

Message

<blockquote data-quote="DSumner" data-source="post: 7809132" data-attributes="member: 92589">3D PRINT IT SERIES: MED BED<img src="https://www.drivethrurpg.com/images/3983/288491.jpg" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" />When there's a fight there's bound to be a few wounds. Any sensible super base is bound to have a medical wing. What is a medical wing without high tech beds? Nothing!This two piece 3d print model is a futuristic looking medical bed. Just the kind of thing your hero needs after they get a few ribs cracked from that last battle.This high tech device is a suitable prop for a super hero or villain base. The design is also suitable for sci-fi/space opera settings, cyberpunk, etc. This model is printed as two separate pieces that you glue together. The default size settings are perfect for miniatures on the 28mm to 30mm scale. Naturally this item can be resized in your slicer program to meet your needs if your miniatures are on a different scale.Here’s the default dimensions for the two parts of the med bed:Base: 57mmx27mmx16mmTop: 42mmx29mmx8mmHere's the recommended Cura settings that have worked for the designer's test print using the following: Ender 3 (printer), Hatchbox 1.75 PLA. Please note that these settings print very slow, but should provide you a nice finish with details. You can always speed the settings up if you prefer speed over fine detail.Layer Height: 0.06mmWall Thickness: .8mmTop Thickness: .6mm (10 layers)Bottom Thickness: .6mm (10 layers)Horizontal Expansion: 0mmInfill Density: 15mm (Grid Pattern)Printing Temperature: 200 C (for PLA)Build Plate Temperature: 60 CEnable Retraction: YesPrint Speed: 40mm[URL unfurl=&quot;true&quot;]https://www.drivethrurpg.com/product/288491/3D-Print-It-Med-Bed[/URL]</blockquote>

[QUOTE="DSumner, post: 7809132, member: 92589"] [B]3D PRINT IT SERIES: MED BED[/B] [IMG]https://www.drivethrurpg.com/images/3983/288491.jpg[/IMG] When there's a fight there's bound to be a few wounds. Any sensible super base is bound to have a medical wing. What is a medical wing without high tech beds? Nothing! This two piece 3d print model is a futuristic looking medical bed. Just the kind of thing your hero needs after they get a few ribs cracked from that last battle. This high tech device is a suitable prop for a super hero or villain base. The design is also suitable for sci-fi/space opera settings, cyberpunk, etc. This model is printed as two separate pieces that you glue together. The default size settings are perfect for miniatures on the 28mm to 30mm scale. Naturally this item can be resized in your slicer program to meet your needs if your miniatures are on a different scale. Here’s the default dimensions for the two parts of the med bed: Base: 57mmx27mmx16mm Top: 42mmx29mmx8mm Here's the recommended Cura settings that have worked for the designer's test print using the following: Ender 3 (printer), Hatchbox 1.75 PLA. Please note that these settings print very slow, but should provide you a nice finish with details. You can always speed the settings up if you prefer speed over fine detail. Layer Height: 0.06mm Wall Thickness: .8mm Top Thickness: .6mm (10 layers) Bottom Thickness: .6mm (10 layers) Horizontal Expansion: 0mm Infill Density: 15mm (Grid Pattern) Printing Temperature: 200 C (for PLA) Build Plate Temperature: 60 C Enable Retraction: Yes Print Speed: 40mm [URL unfurl="true"]https://www.drivethrurpg.com/product/288491/3D-Print-It-Med-Bed[/URL] [/QUOTE]

Verification