Reply to thread

Message: <blockquote data-quote="Kormydigar" data-source="post: 2892904" data-attributes="member: 17113"><p>It really depends on the mini. For most regular sized figures superglue works just fine. For larger and heavier figures (or regular sized ones that are unbalanced because they lean way off the base) I will use the slot but also pin the mini using a pin vise and a bit of wire. I cut the wire a bit long so that it can bend in an "L" shape under the base. After the mini is glued and pinned to the base I will fill the hollow underside of the base with putty (usually just DAP spackle for cost effectiveness) and let it dry. This adds weight to the base and really anchors the pin. Once completely dry the bottom of the base can be sanded smooth.</p></blockquote><p></p>