Upgrade your account to a Community Supporter account and remove most of the site ads.

Reply to thread

Message: <blockquote data-quote="tomBitonti" data-source="post: 6317979" data-attributes="member: 13107">Ah:Lots of good details in that Flames of War link.The Eye Tyrant is 7" (178mm) tall, on a 3" base (75mm), and seems to have 19 pieces.In comparison, the purple worm is 3.2" high (80mm), but also on a 3" (75mm) base.Lolth seems to be 2.2" (57mm) high and 3" (76mm) wide, but I don't trust the height.The Umber Hulk is 2.1" (55mm) high and 3" (76mm) wide, with a typical hunched pose.Of the figures the Umber Hulk seems to be potentially the most fragile, with those huge forearms on a very narrow upper arm.Here what I see as the Eye Tyrant parts.  I understand the casting of Resin to be quite accurate, so the parts should assemble without fuss.  (The problem with Resin seems to be getting the full detail to cast; that was a big problem that GW had.  Anyone have information about how that resolved?  My experience there is about two years old.)Main BaseTreasure PieceRight BodyLeft BodyUpper JawLower JawSpineLeft TendonRight TendonEyestalks (x10, on 4 sprues)I don't understand about the Eyestalks; the body seems to only have 8 attachment points for the Eyestalks.The Soundrels of Skullport figure (named "Xanathon") seems definitely smaller, with proportionately larger eyestalks.  Xanathon also has a much simpler base.I don't find a picture anywhere of a Froghemoth in this minature line, although, Center Stage Miniatures has this:<a href="https://www.kickstarter.com/projects/centerstageminis/tome-of-horrors-complete-28mm-heroic-scale-miniatu/posts/566675" target="_blank">https://www.kickstarter.com/projects/centerstageminis/tome-of-horrors-complete-28mm-heroic-scale-miniatu/posts/566675</a>Thx!TomB</blockquote>

Verification