Reply to thread

Message: <blockquote data-quote="ki11erDM" data-source="post: 4244717" data-attributes="member: 58179">Odds are it was just bad.  The only thing I can think of that you could have done was overclocked the onboard card and burned it out.  But from reading your posts you don’t sound like that kind of person.  hehe.I have seen the end results of one person spill water into the vent holes on the back of their CRT which caused a rather energetic monitor failure... it did fry the video card and left the rest of the system ok.And I guess you could have destroyed the VGA/DVI port some how… but again that is not very likely.If you feel like opening your case again you could look for something like this on your board: <a href="http://www.pavelec.net/adam/CapsCrop.sized.jpg" target="_blank">http://www.pavelec.net/adam/CapsCrop.sized.jpg</a>If you see that bit of corrosion on the cap of the capacitors you know for sure what your issue was… not that it helps a lot…</blockquote>