Reply to thread

Message: <blockquote data-quote="Stoat" data-source="post: 4634130" data-attributes="member: 16786">I have done something similar and based on my experience, it may not be possible for you to do everything you want to do:  IE: a freestanding 9-story tower with a Fog of War effect.Do you have Campaign Cartographer?  Do you have access to a color printer and massive amounts of ink?When I tried this, I mapped out the entire dungeon using CC2.  Each room occupied its own layer of the map, so that each room could be displayed by itself.  I printed out each room separately on regular paper using an inkjet printer at a scale of 1 inch to five feet.  I carefully cut out each room using an X-acto knife.  I then used rubber cement to glue each room to a piece of foamboard, and then I cut out each piece of foamboard, again with an X-Acto.  The result was like a huge foamboard puzzle.  Each room was a separate piece.  When the PC's entered a room, I could put down that piece only, creating a fog of war effect.  I did not build walls and I did not try to create an actual model.This method will work well for you if you don't want to create an actual model building.  You'll be able to display one floor at a time pretty easily.</blockquote>