Reply to thread

Message

<blockquote data-quote="TheAuldGrump" data-source="post: 5361456" data-attributes="member: 6957">And do not forget the PDF option - there are a lot of companies that do some very, very nice tiles in PDF format - odds are very good that you will find something that will work for what you want, and you can cut them up as you see fit, since if you muff one you can print another copy.Going to the E.N. World PDF store you can find things by Skeleton Key (lots and lots by Skeleton Key), World Works (Including one for Pathfinder that can be either 2D or 3D), Encompass (very nice bathhouse - I believe this is the one I used in Eberron for an encounter with a silver dragon), and Fat Dragon - and that was just a quick look.Bathhouses, sewers, caves, and corridors - both in 2D and 2.5 (flat tile, with 3D elements, such as doors, altars, etc.). Some have elements on layers that can be toggled on and off.I tend to glue them to foam core, but glued to thick card many would be quite compatible with the WotC products. <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" /> I think that floor tiles is one of those areas where PDF is actually superior to print.The Auld Grump</blockquote>

[QUOTE="TheAuldGrump, post: 5361456, member: 6957"] And do not forget the PDF option - there are a lot of companies that do some very, very nice tiles in PDF format - odds are very good that you will find something that will work for what you want, and you can cut them up as you see fit, since if you muff one you can print another copy. Going to the E.N. World PDF store you can find things by Skeleton Key (lots and lots by Skeleton Key), World Works (Including one for Pathfinder that can be either 2D or 3D), Encompass (very nice bathhouse - I believe this is the one I used in Eberron for an encounter with a silver dragon), and Fat Dragon - and that was just a quick look. Bathhouses, sewers, caves, and corridors - both in 2D and 2.5 (flat tile, with 3D elements, such as doors, altars, etc.). Some have elements on layers that can be toggled on and off. I tend to glue them to foam core, but glued to thick card many would be quite compatible with the WotC products. :) I think that floor tiles is one of those areas where PDF is actually superior to print. The Auld Grump [/QUOTE]

Verification