Dice Base: Player Core - Hardwood Player Case and Rolling Surface

[halzucati]

Find it here: https://www.kickstarter.com/projects/zucati/dice-base-player-core





[h=1]Now available[/h] In the following wood species:

• Cherry - $25 Naked (per pledge)
• Oak - $25 Naked (per pledge)
• Walnut - $40 Naked (+15 to pledge)
• Poplar - $50 Naked (+25 to pledge)
• Leopardwood - $50 Naked (+25 to pledge)
• Birdseye Maple - $50 Naked (+25 to pledge)
• Zebrawood - $60 Naked (+35 to pledge)
• Wenge - $60 Naked (+35 to pledge)
• Yellowheart - $60 Naked (+35 to pledge)
• PurpleHeart - $70 Naked (+45 to pledge)
• Bloodwood - $75 Naked (+50 to pledge)
• Bolivian Rosewood $125 (+100 to pledge)
• Leather Rolling Surface Insert (+$10 to pledge)

Note: You can have the Player Core made in almost any wood species you want, but additional costs will apply for wood and tooling changes. More wood species may be added to the above list of "available wood species" for extra good prices, it all depends on how many backers and how high they pledge during this very short campaign. Want something specific? Just ask!
[h=1]The Player Core[/h]Made from hardwood cherry and designed to store your:

• Dice
• Character Sheet
• Pen
• Minis (In the lid)

[h=1]The Player Core Technical Information[/h]

• Holds around 50 polyhedral dice
• Holds around 60 D6 dice
• Is 6.5" Wide
• Is 6.5" Tall
• Is .67 Deep each half
• Pockets are 0.55" deep
• Pockets are 0.87" tall
• Pockets are 6.00" wide
• Rolling Surface is 0.55" deep
• Rolling Surface is 6.00" x 6.00" in Width and Length
• Closes securely with four (4) N52 1/4" x 1/2" magnets, one at each corner.

Thanks!
- Hal Zucati