Reply to thread

Message: <blockquote data-quote="Drachenherz" data-source="post: 1928337" data-attributes="member: 26936">An IdeaRather than lopping off the entire staff, why not just lop off the ends, size-match a drill bit to the shaft, then drill holes with that bit in the undersides of the axe-heads? I've done this before, and it works quite well. I would have gone through a local hobby store or hardware store for the toold though. GW brand tools are obscenely expensive, and you can get good tools for far lower prices at hardware/hobby stores. The same goes for the flocking, the glue, etc... Another question: how do you plan to paint the figure? If the figure is supposed to be darker, black primer may work better. However, if you want medium-light/bright colors, go with a white primer. If you insist on black, at least get some Reaper brush-on white primer. That way you can go over the skin/hair/clothes/etc... with the white, then follow the normal steps of painting and shading w/o the colors being too dark. Just a hint for you. Happy holidays!</blockquote>