Upgrade your account to a Community Supporter account and remove most of the site ads.
Rocket your D&D 5E and Level Up: Advanced 5E games into space! Alpha Star Magazine Is Launching... Right Now!

Reply to thread

Message: <blockquote data-quote="MGibster" data-source="post: 9673712" data-attributes="member: 4534">While it won't ever completely supplant my brushes, the airbrush really speeds things up, especially for larger models.  Though I've also started using one of my airbrushes for work on smaller miniatures.  I've got plans for that myconid queen if I ever get my hands on it.  Yours looks great by the way.The biggest drawbacks to an airbrush are cost, space, and the learning curve.  Let's talk about cost first.[ATTACH=full]407205[/ATTACH]Iwata Revolution CR (right) - $110 - .5 mm needle (Good starter brush.  More on that later.)Iwata HP-B Plus (left) - $210 - .2 mm needle (Not a good starter brush.  More on that later.)Airbrush Compressor w/ Air Tank - $100 - (There are more expensive compressors but this is a good start.)Spray Booth - $100 - (You could make one, but I'm lazy and got this one using Amazon gift cards.)When I started airbrushing in 2020, right out the box I was out a little over $300 (I didn't buy the HP-B Plus until 2023).  That's a decent chunk of change that didn't include supplies like an airbrush cleaning kit, paint thinner, or broken nozzles.  The nozzle on the Revolution cost about $40 and I had to replace it twice the first year because I broke it.  I could have practically bought a whole new airbrush for that price.  While they do make airbrush specific paint, you can use thinner and flow improver to get it to work with your airbrush so that's a plus.  Speed/Contrast paints don't usually need any thinner in my experience.Space is another consideration.  You've got to set yourself up in a work area you don't mind getting dirty.  Even if you're on target all the time, a little of the aerosolized paint will settle down and things nearby will take on a dusty appearance.  This can be mitigated with a spray booth which has a fan to direct the spray where you want it to go.  Larger models can actually be a problem because they might not fit inside your spray booth!  But it's not a very common problem unless you're regularly painting abnormally large miniatures.Then we have the learning curve which is actually simultaneously fun and frustrating all at once.  Playing with the airbrush is fun...until it becomes frustrating.  Not only do you have to figure out how to best make use of the airbrush but you've got to maintain it properly or it will cease to function.[ATTACH]407206[/ATTACH]This is my Revolution when I break it down for a deep cleaning.  The nozzle, that dot in the upper right, is fairly delicate and in my first year I had to replace it twice.  Note:  Do not use the tool that comes with the airbrush to put it back on.  But a special tool ($12) to do that.  It'll save you some grief.  I had to do a lot of deep cleanings that first year, and the second year, and even the third year because learning how to properly thin your paints is a process.  Sometimes I still get it wrong, but if you're doing it right you won't have to perform a deep clean on your airbrush as often.  This is the first time I've broken down my airbrush this much in a few months.  At some point you're going to bend your needle tip and will have to replace it for about $12.  Then there's actually painting with it.  If you're already good at color theory and basic art concepts then you're ahead of the curve.  But you'll have to learn how different paints work through the airbrush, what PSI to set your compressor at, what you can do with the airbrush versus your brush, etc., etc.  But while I like my airbrush, you don't need one to paint miniatures with.</blockquote>

Verification