Reply to thread

Message

<blockquote data-quote="dclunie" data-source="post: 5348511" data-attributes="member: 91004"><img src="http://lh4.ggpht.com/_REg-LhD7u8I/TLJ5OMG9bTI/AAAAAAAAX68/OFNNJkYxzeA/s400/paper_models_longtable_action.JPG" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" />Hey Everyone,I created a long table for use within an alchemist lab (but can be used in other situations as well.&nbsp; Its 2 in. x 1 in. in length/width and 1/2 in. high.&nbsp; The table top is 1/4 inch thick and the supports (there are two) are cubes in the middle of the table at 1/2 in. each.&nbsp; The height can be varied if needed (for example if your figures are based) the way they are configured in the pic is with the support actually 1/4 into the table top and as a result the top is quite sturdy.&nbsp; You could just glue the cube supports to the table bottom and not cut square holes in the bottom to give it extra height or even then glue the supports to a base for even further height.I created two versions of the file located on my site <a href="http://www.d4d6d8d10d12d20.com/2010/10/free-paper-model-tables-for-your-rpg.html" target="_blank">here</a> one set all beat up with cracks mug stains, blood stains, pentagrams, etc. and a completely &quot;clean&quot; version for your customization needs.&nbsp; Thanks for taking a look and hope you enjoy the freebie <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f609.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=";)" title="Wink&nbsp; &nbsp; ;)"&nbsp; data-smilie="2"data-shortname=";)" />-david <a href="http://www.d4d6d8d10d12d20.com" target="_blank">d4d6d8d10d12d20</a>sneak peak:&nbsp; Lab Equipment will go up on wed <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f600.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":D" title="Big grin&nbsp; &nbsp; :D"&nbsp; data-smilie="8"data-shortname=":D" /><img src="http://lh5.ggpht.com/_REg-LhD7u8I/TLJ5O9-bXhI/AAAAAAAAX7A/TfM3REvBFaA/s400/transparency_model_labequipment_action.JPG" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" /></blockquote>

[QUOTE="dclunie, post: 5348511, member: 91004"] [IMG]http://lh4.ggpht.com/_REg-LhD7u8I/TLJ5OMG9bTI/AAAAAAAAX68/OFNNJkYxzeA/s400/paper_models_longtable_action.JPG[/IMG] Hey Everyone, I created a long table for use within an alchemist lab (but can be used in other situations as well. Its 2 in. x 1 in. in length/width and 1/2 in. high. The table top is 1/4 inch thick and the supports (there are two) are cubes in the middle of the table at 1/2 in. each. The height can be varied if needed (for example if your figures are based) the way they are configured in the pic is with the support actually 1/4 into the table top and as a result the top is quite sturdy. You could just glue the cube supports to the table bottom and not cut square holes in the bottom to give it extra height or even then glue the supports to a base for even further height. I created two versions of the file located on my site [URL="http://www.d4d6d8d10d12d20.com/2010/10/free-paper-model-tables-for-your-rpg.html"]here[/URL] one set all beat up with cracks mug stains, blood stains, pentagrams, etc. and a completely "clean" version for your customization needs. Thanks for taking a look and hope you enjoy the freebie ;) -david [url=http://www.d4d6d8d10d12d20.com]d4d6d8d10d12d20[/url] sneak peak: Lab Equipment will go up on wed :D [IMG]http://lh5.ggpht.com/_REg-LhD7u8I/TLJ5O9-bXhI/AAAAAAAAX7A/TfM3REvBFaA/s400/transparency_model_labequipment_action.JPG[/IMG] [/QUOTE]

Verification