Reply to thread

Message: <blockquote data-quote="Celebrim" data-source="post: 9799666" data-attributes="member: 4937">There is a map.  A really good one, actually.  And I would say the only confusing thing here at all is K61 isn't actually marked on the map, possibly by mistake or possibly just because the 30x10 corridor is small or both.There isn't a trap at K31.  All that is at K31 is the machinery that moves the trap at K61.  If for some reason you disable the machinery at K31, the trap at K61 won't function.K61 is the location of the trap.  The trap is activated by pressure plates in K61 as is described in detail by that entry.Is a corridor that allows access to the shaft (K31a) used by K61's trap.This is the destination of the trap in K61.  A sentence in that keyed location says that there is a trap door in this location that leads to K31a.  But note, this door is not a trap.   It's just an access panel. Is the elevator shaft that the trap in K61 uses to reach K47.  And K47 mentions this.Contains the secret door leading to the K31b access corridor.Err... K31a tells you a ton of things including that the trap is normally located in K61.But there is "A trap door in the floor leads to K31a."Nothing in K31 springs the trap.  The trap is in K61 and described in detail there.  What I get from this though is that modern maps aren't complicated enough and have so much linearity and are generally so two-dimensional that this sort of confusion isn't even possible.</blockquote>