Reply to thread

Message: <blockquote data-quote="Scorch" data-source="post: 2799375" data-attributes="member: 1502">The four tiers are two inch thick insulation foam carved out with a dry wall knife/saw.  They are 12" square, 10" square, 8" square, and 6" square.  I glued them onto a 12" square piece of self adhesive floor tile.  I then cast some Hirst Arts blocks from dental plaster for the stairs, door frames, and upper ruins.  After gluing it all together I then use some wall spackle to fill in the gaps and then sand it down with a rough grade sand paper to give it a rough look.  I use a small file to carve out the brick like molding.  Some modeling clay, glue, and corn straws from an old broom provide the long strands of grass you see poking out here and there.  I paint it all black using an acrylic paint (no spray paint on foam, it eats right through it like acid) and then paint it the way you see it with grey, green, and gold.Scorch.</blockquote>