D&D 5E ForgedAnvil D&D 5E Character Generator

[rhombism]

Thanks for the feedback, for the light domain cleric I don't believe they get mirror image as a spell - correct me if I am wrong though. Page 3 should be set up to fit 1 page wide and height should be set to automatic (you can set this under Page Layout in the ribbon menu). For the spell attack modifier you can choose this under the Attacks dropdowns on the Start sheet, e.g. Spell Attack (Int) and it will show this on CSI. Refer to Example Character Zenith for details (and some cool formula used, go to Formulas > Show Formulas). For your AC + use the other armor in the armor section on the Start sheet.

Thank you so much.

The Mirror Image spell is indeed only a Trickery domain spell. My confusion came because I got the Spell Cards recently and the card is misprinted and doesn't say "Trickery - Cleric" on the bottom as it should, so I thought it was a general spell, which it's not. Not sure if I'll tell my DM that yet...

I got Page 3 to print right by manually adjusting the Page Layout. Height and Width were set to automatic, but it was set to print at 41% rather than as "1 page wide, 2 page long" so once I changed to set to that it worked correctly.

Attacks and AC + made total sense once I knew where to look.

Thanks again, great help.

 

[Hrrunstar]

Combat to hit for magic on CSIII

Heya ForgedAnvil, thanks again for my favorite CS of 5ed!

Possible improvement:
Can the magic to hit total be shown on CSIII? I do not always have a melee or range spell that I use often enough to put in the combat section of CSI and so that I would automatically know that bonus when I am evaluating spells to cast from CSIII without referring to the other sheet. A convenience feature, to be sure

Thank you

 

[flwad]

Just a thought for your consideration:

=SUMIF(BU14:CP150,"Backpack",CR14:DA150)to drop the backpack enter -1 in QTY

The new version of CSII must be using a Named Variable for Total Weight Carried. This causes a problem when the previously discussed work-around for a Bag of Holding, etc. i.e copy CSII to a new tab and Copy & Paste Values during transfers. The copied sheet shows the same weight total as CSII. I used your post as a basis for a work-around. I included an entry in the Attuned Magical Items called Total This Page with a Quantity of 1 and a Weight Override of '=SUM(CR14: DA138)' (Extra space between : & D to keep out emoticon). Please comment if this formula needs changed. Also, it would be nice if there were a check-box like the one on CSIII for removing Blank spells that would override the Total Weight Carried for a simple sum of the current page.

A second note for consideration for 2.0: The coinage section on Start & CSI would probably work better on CSII. I carry most of my coinage in my BoH but it shows up in the Total Weight Carried. A possible location would be above the Race, Class, Background & Feats section. Small added note: I am carrying >1000 PP from my adventuring & the Coinage section shows ### for PP Carrying.

As always, many thanks and admiration for your effort.

 

[flwad]

Bug Note: In 1.64, the Damage Resistances & reductions from Start aren't showing on CSI.

 

[Iraelaemei]

Am I just not seeing it, or is there no place to add a custom Subrace, for a Custom Race?

 

[Mergon]

Custom Races, sub-classes, deities, spells, and backgrounds are all on the custom tab.

I've been fooling around with additional tabs and the Additional Details box on the Start tab to try use custom classes. For the most part I can simulate custom classes by using a different class as a foundation, but most of the time it is cumbersome.

 

[DrWorm]

I am having a hard time getting the Wildshape sheet to work. I am running the latest version of LibreOffice, so it's possible that some macros are not being implemented as they should be, but there is nothing in the dropdown and when I type in a beast it says it's an invalid entry. I have all my Druid levels on the sheet and have selected Moon circle. Have I missed some step?

 

[flwad]

I am having a hard time getting the Wildshape sheet to work. I am running the latest version of LibreOffice, so it's possible that some macros are not being implemented as they should be, but there is nothing in the dropdown and when I type in a beast it says it's an invalid entry. I have all my Druid levels on the sheet and have selected Moon circle. Have I missed some step?

Only Macros are for Sheet reset and transfer. This is one of the great aspects of FA's work. It can be used across platforms.

The entry for the wildshapes is on Spellcasting Tab. Left side under Familiar / Animal Companion / Wildshape. Enter here then view details on Wildshape Sheet. Check Details before use. FA is currently revising.

Hope this helps

 

[DrWorm]

Only Macros are for Sheet reset and transfer. This is one of the great aspects of FA's work. It can be used across platforms.

The entry for the wildshapes is on Spellcasting Tab. Left side under Familiar / Animal Companion / Wildshape. Enter here then view details on Wildshape Sheet. Check Details before use. FA is currently revising.

Hope this helps

I should have been more clear, I tried entering in the Spellcasting tab, but when I click on the field there is a drop-down arrow with nothing in the menu. I try to type (for example Dire Wolf) in that field and it tells me it says Invalid Value.

Looking at much of my sheets there seems to be a point at which nothing transfers from the Start (or spellcasting as the case may be) tab to the sheets. For example I indicate classes for my levels, and input the die result for hp for each level, but the character sheet just has NAME# in the box where HP should show. It seems like that is about as far into inputting a character as I can get- everything from there on out doesn't transfer. I can put my abilities in, my proficiencies, my race and background, which all populate other fields as they should and show up on the Character Sheet, but not much else.

 

[ForgedAnvil]

Heya ForgedAnvil, thanks again for my favorite CS of 5ed!

Possible improvement:
Can the magic to hit total be shown on CSIII? I do not always have a melee or range spell that I use often enough to put in the combat section of CSI and so that I would automatically know that bonus when I am evaluating spells to cast from CSIII without referring to the other sheet. A convenience feature, to be sure

Thank you

Thanks for the feedback, will look at this for v2.00 (will be sometime before release, a lot of work to do)